Blog design and digital scrapbooking elements created by Adori Graphics »

Saturday, April 13, 2013

Remake of Ken's dresser


Kennedi's dresser and night stand was a hand me down from us, which was a hand me down from my grandmother. I decided that it could use an update.  I forgot to snap a picture of the before, but here is it after I sanded it down.  It was made out a solid wood, but is had this slick plasticy finish on it, so I found some primer that says it sticks to any slick surface.  Bulls-eye 123 Primer.  The primer said it didn't need to sand, but I did any way for good measure. I let it dry for 24 hours and then painted the base coat a shade of lilac.

I then glazed the dresser and nightstand with a dark coffee brown.  If you haven't used a glaze, try it! It's so easy!  Just paint on, and rub off with a dry cloth.  Rub off how much you want until you get the look you're going for.  Leave extra in the creases and cracks!

Lilac painted night stand.  I won't talk about the dust I found when I removed the drawers. 

Finished product! Much better, don't you think?



Found these awesome knobs and pulls at Knob Deals. If you haven't shopped for hardware, beware, it's very expensive--especially cute kids' hardware.  We're talking $8-20 bucks a knob or pull.  I got the butterfly (and it's large=2 inches in diameter!) for less than $2.00 a knob.  The pull is glass--less than $4 a pull. 

The primer says for full cure takes 7 days. I didn't wait for the 7 days before I put it back into her room.  I noticed a chip on Kennedi's nightstand afterwards, so I went ahead and put three coats of polycrylic on everything a few days later.  Six weeks later and so far, so good! It's holding up well to my 6 year old!

1 comments:

www.adventureswithaidan.org said...

That dresser turned out awesome! You have artistic talent!

 
Free blog design by Adori Graphics using the Safari Sam digiscrapping kit by Adorible Digital Designs